What Are Your Best Long-Term Fuel Storage Options?

Whether you want to take advantage of temporarily low fuel prices rather than paying higher prices at the pump for the next few years, or are concerned about a fuel shortage in your area and want to ensure you and your family are never without a source of backup power, you may be investigating the best ways to store a large quantity of gasoline, bio diesel, or propane in your garage or basement for an extended period of time. While doing this could save you a substantial amount of money, it is not without its dangers — and storing this fuel in an improper manner could leave you with expensive sludge unable to power any piece of machinery. Read on to learn more about the best ways to store these fuels over the long term while preserving their quality.

How should you store gasoline or diesel over the long term?

Both gasoline and diesel can lose their potency fairly quickly, especially when stored in a warm or hot area. While untreated diesel can “survive” for about a year when stored in an airtight container, if this diesel container is stored at 70 degrees or above during most of this time,  you may find that the potency drops off significantly at the six-month mark. As a result, it’s important to store your gasoline or diesel in a cool, dry location.

Fortunately, you don’t need any special holding tanks or other equipment to keep your fuel in good shape for a year or more — in most cases, storing gasoline or diesel in an ordinary plastic or metal gas can will protect the contents while making this fuel easy to handle and transport. Adding fuel stabilizers and additives will help extend the lifespan of your stored fuel, keeping it potent much longer than untreated fuel. If you’re continuing to purchase and store gasoline or diesel from a company like the one found at http://www.smallandsonsoil.com during this process, you’ll want to periodically rotate your stock to ensure you’re using up the oldest fuel quickly.

What are the best ways to store heating oil? 

Unlike gasoline, heating oil is generally shelf-stable and can last more than two years even without treatment. However, there are still some additives you can place in your heating oil tank that will help prevent the formation of sludge and keep your fuel in good shape. You’ll also want to ensure your oil remains at a fairly steady temperature year-round — whether this means burying a metal storage tank in your yard or keeping a PVC tank in your climate-controlled basement. By preventing temperature swings, you can all but guarantee the oil you buy at a discount this summer can reliably and inexpensively heat your home for the next several winters, even after prices rise. 

There Are Pros And Cons To Choosing A Metal Roof

When you are building your house, there are different kinds of roofing material that you can choose from. One kind is metal. If you are thinking about going with metal roofing, you may wonder what its pros and cons are.

Metal Roofs

You can choose from all kinds of metal for your roof. The most common choices are copper, tin, and aluminum. The price range varies, depending on what kind of metal you want and they tend to have the same lifespan, generally somewhere around 40-70 years. There are some general pros and cons that are common to all metal roofs. 


One of the pros of getting a metal roof is that it is extremely fire resistant. This is an extremely good benefit if you live in an area that is prone to wild or brush fires. If you are retrofitting a metal roof over an older roof, the fire resistance may be slightly lowered due to the flammability of the previous roofing material. 

Metal roofs are also lighter than things like tiles or slate. This may seem counter-intuitive, however, the metal is much thinner than the tile or slate is, which lessens the weight greatly. If you have a large area that needs to be covered a metal roof will let you span that area without as much support as you might otherwise need to have. 

Another entry on the plus side for metal roofs is that it is much easier and quicker to install one of these roofs. The metal roofs generally come in large sheets that are installed using fasteners that allow for the flexing that a metal roof is prone to. 


While metal roofs are a pretty good choice, there are some problems that are associated with them.

One of those problems is noise. Some people may like the sound of rain pitter-pattering on their roofs, but it can be noisy. Heavy rain, sleet, and hail can all sound very loud when they hit the roof. Another issue with noise is that the wind can rattle the roof, and in heavy wind, it can sound somewhat eerie. This can be somewhat alleviated by installing plenty of insulation under the roof, which can dampen the noise so that you aren’t as affected by it. 

If you are trying to decide what kind of roof you want to have on your new house, then you may want to consider getting a metal roof. Contact local professionals, such as those from JD Metals

An In Depth Guide To Laser Cutting

When it comes to the manufacturing industry, you will need to be sure that you invest in the best technology to assist you in your work. One of the best manufacturing technologies you can invest in is laser cutting. For instance, if you need to take raw metal and produce parts, prototypes and equipment, one of the best things you can do is reach out to a processing and manufacturing company that can provide you with the laser cutting work that you need. 

What is laser cutting work?

In the manufacturing industry, laser cutting refers to the practice of taking a computerized design and using it to cut and fabricate a new part from scratch. This is made possible through the use of a sophisticated laser so that any material can be burned, molded and melted in a way that makes the most sense for you. A gantry laser system guides a laser beam in a perpendicular manner to directly affect the material that is being manipulated. A galvanometer instead cuts by using mirrored angles, allowing you to cut from more than 100 different angles at a time. These pieces of machinery are highly sophisticated and will be useful to people in a number of different industries. 

What are the benefits of laser cutting?

Laser cutting is incredibly advantageous for a number of reasons. One of the greatest benefits is that the laser is able to cut through materials of incredible thickness. The laser cuts with incredible precision and at speeds that other methods of processing and manufacturing cannot rival. Further, you will be able to handle more cuts all at once, allowing you to essential save money in your mass production and manufacturing efforts. This technology can be put to use when you hire a laser cutting contractor that can handle your project with great detail and sophistication. 

What are some matters that can affect the cost?

When you are looking to get the best prices possible for your laser cutting needs, there are a number of factors that can affect this. For instance, you may get higher prices due to the need for the machine to greatly accelerate or decelerate, uncommon and tricky cutting angles, the need for great deals of gas to power the cut and the length of the focus lens. By shopping around for estimates from different laser cutting professionals, you will increase your chances of getting great prices. 

Consider these valuable points in order to take advantage of professional laser cutting (from companies like J&E Metal Fabricators). 

Guarantee Service And Professional Expertise – Questions For Your Sheet Metal Fabricator

Sheet metal fabrication has long been an extraordinarily important part of the manufacturing process, but it’s also a unique activity that is equal parts art and skill. It’s no surprise, then, that many manufacturing firms rely on outside sheet metal fabricators, but those relationships can be difficult without a proper understanding of some of the nuanced parts of the process.

Below, you’ll find a guide to some questions that you should be sure to ask of your sheet metal fabrication firm. Having the answers to these questions will not only help pull back the curtain on the process, but will also make sure that confusion is eliminated and you develop a solid working relationship for many years to come.

Ask About Lead Times

Whether you’re making boutique products for a small business or you’re responsible for generating large inventory for a massive firm, everyone wants their production line to be completed as soon as possible. As such, delays from your sheet metal fabricator can be extremely frustrating, but those delays shouldn’t get in the way of a positive relationship.

Indeed, many cases of delays are simply a result of poor communication. Asking your fabricator about their time requirements and comparing it to your orders can make the relationship function much more smoothly, and can also allow you to develop a better understanding of the constraints they may be under.

Ask About Environmental Impact

Not only are environmental concerns an important part of being a responsible corporate citizen, but they also may contribute to the perception of the public. Whether positive or negative, the view of your company can be reflected in the impact you have on the world around you, and sheet metal fabrication is tied closely to that.

Be sure that you have a complete understanding of the processes and waste disposal used by your fabricator. You may also want to inquire as to the availability of recycled materials, both for sake of public relations and fiscal responsibility.

Ask About Bulk Pricing

Ultimately, the primary reason to outsource a task like sheet metal fabrication is to make your operation more streamlined and economically efficient. As such, looking for deals should be a part of that outsourcing. If you expect to order the same parts on a regular basis or if your need is about to expand, small orders as needed are more expensive than they have to be. Your fabricator may offer you an excellent bulk discount, building a strong relationship based on economic advantage.

Cool Ways To Create No-Slip Plastic Coat Hangers

Plastic hangers offer a variety of advantages over their metal or wood counterparts, but one area where they might frustrate you is slippage. While not a constant problem, clothes (especially shirts) can slip off of plastic coat hangers. Thankfully, there’s a variety of ways that you can stop that slippage. Most of these projects require very little work.

Hot Glue Sticks

Lack of friction is a major contributor to plastic hanger slippage issues. However, if you some hot glue dots along the length of your hanger, you can create an easy grip surface that will keep your clothes from falling off. Working with hot glue sticks is relatively easy and requires only the following steps:

  • Insert your hot glue stick in the gun
  • Plug in the gun and let it warm up
  • Place several small dabs of glue along the length of each side of the hanger
  • Let the glue dry for several hours before using

Modeling Clay

If you don’t want to use hot glue or simply feel comfortable using modeling clay, you can emulate the same effect by pressing small blobs of quick dry modeling clay along the length of the hanger. Use this simple process:

  • Pull a small dab of clay out of the can
  • Press it along the top of the horizontal section of the hanger
  • Try to create little “hooks” in the clay (small vertical strands) to give the cloth of your clothes something on which to cling
  • Continue adding these little clay hooks (at least four on each side) and let the clay dry for several hours

Wooden Clothes Pins

Power clothes dryers have made clothes pins somewhat outdated. However, if you have a pile of these old pins (particularly the pinch models, which can also be used in many cool crafts), you can easily adapt them to your plastic clothes hangers to make them no slip. Follow this simple process:

  • Attach a wooden clothes pin near each end of your hanger
  • Turn it around so that the bottom of the pin is located at the bottom of the hanger
  • Carefully adjust its position so that the legs of the hanger are between the bottom run of the hanger
  • Hang your shirt on the hanger and adjust it until it fits comfortable
  • Put your hand under the shirt and open the clothes pins to let in a little cloth
  • Let go of the pin to clothes

If this pinning process is too complicated, you can also attach the pins on top of the clothes. However, this may make the pins an obstruction when storing them in the closet.

Whatever craft you decide to try out, feel free to adjust the instructions to suit your needs. For example, for some clothes (such as heavy jackets), you may need more clothespins to hold them down. The most important thing, though, is to just have fun.

3 Creative Uses For Acrylic Fabrications In Your Commercial Bakery

When you pass the acrylic fabrications shop on your way to your commercial bakery every morning, you may never give this skilled trade shop a second thought. However, there are many reasons why an acrylic fabricator could come to be one of your most valuable business suppliers in the bakery business. Acrylic materials, which are much like plastic but far more durable, could come in useful for everything from packaging to displaying your products, and everything in between. Here are three creative uses for acrylic fabrication in your commercial bakery that you should definitely consider.

1. Work with a designer to create astounding cake and pastry displays.

Because acrylic is so versatile, it can be cut, molded, and formed into varying curvatures and shapes. By working with a designer in an acrylic fabrication shop, you can design a custom pastry and cake display that completely conforms to the shape, style, and individuality of your bakery. Not only are acrylic pastry cases versatile in their design, they are highly resilient as well, having the ability to outlast glass by a long shot without the concern of damage.

2. Obtain custom cake stands for cakes of every style and size.

Many bakeries that boast a lot of custom cake sales go for wooden cake stands that are cut and formed to fit their creations. However, fabricated acrylic cake stands make a lot more sense. Acrylic is lighter in weight than wood, which means the cake stand itself will not add heft to the cake so it will be easier to maneuver and transport. Plus, acrylic is just as strong and supportive as wood without having to be as thick in construction, making it easy to add support without altering the overall appearance with bulky stands that take away from the design.

3. Take advantage of crystal clear signage that is bound to be an eye-catching feature in your bakery.

Acrylic signage is unique for a lot of reasons. It is lightweight, so it can be mounted just about anywhere without effort. Acrylic is translucent, so it works incredibly well with lighting implemented. Acrylic wording signs with lighting cast a glowing back-lit look on the wall to give a 3-D sort of appearance that is attractive and an effective way to catch attention of your customers. Use this crystal clear signage over specialty cake displays in your bakery and every passerby is bound to take note.